Write a Review

- AL6061 alloy tubeless Presta valve - Includes 2 O-rings, one standard profile and one aero profile, for an airtight seal on any rim - Removable valve core for installing sealant - Additional replacement valve cores sold separately - Sold individually

Champion 2.0 Black Spokes - One 264mm spoke = 7g

Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims. 21mm width fits: - ZTR Olympic - ZTR Iron Cross - ZTR 355 - ZTR Alpine - ZTR Crest - ZTR Alpha 340 (2 layers) - ZTR Alpha 400 (2 layers) - Most road clincher rims 25mm width fits: - ZTR 355 (26", 650b, 29") - ZTR Crest - Crest MK3 - ZTR Arch EX - ZTR Flow EX - Crest S1 27mm width fits: - ZTR Flow EX - ZTR Bravo - ZTR Hugo 52mm - Arch S1 - ZTR Rapid 28 - ZTR Rapid 30 - Arch MK3 30mm width fits: - ZTR Flow MK3

- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity - No retainer means these bearings have 40 percent more capacity

Recent advancements have made carbon fiber nearly equal in strength to aluminum, but these innovative technologies typically come at a high price. For when durability, strength, and budget are the top three things on your wheel search list, nothing beats aluminum as the material of choice. With this in mind, we set out to create an alloy wheelset that features many of the desired qualities found in a carbon wheel, such as low weight, stiffness, and good looks, but with the durability to train and race both on and off road. In the end, our SLX 24 wheelset came out as a lightweight, durable wheelset that’s ready for whatever you throw at it. The wide profile of the SLX 24 is what really sets them apart from others in the same weight category. Most wheels in this category feature a much narrower internal width, a flaw that impairs a proper tire/rim match. But the 20mm internal rim width of the SLX 24s have them pair nicely with road and 'cross tires alike. This match allows for lower rolling resistance due to the ability to run lower pressures and wider tires. Lower pressures with wider tires and rims is somewhat of a new concept, but can greatly improve ride quality and performance. Wide rims allow for more air volume in the tire, and with more air, less pressure is needed to have the same resistance to pinch flats, providing you with a more supple ride without the risk of flats both on and off-road. On the performance side of things, less pressure equates to less rolling resistance via the tire soaking up road imperfections rather than bouncing over them. When too much pressure is in a tire, without realizing it, your bike will ever-so-slightly spring over road imperfections, wasting precious watts—but lower pressures soak up these bumps and keep use your power strictly for forward movement. Less pressure also greatly improves grip, inspiring confidence when the road gets twisty. Even with a budget-friendly price in mind, we made sure not to compromise quality with the build components of our SLX 24. The use of quality alloy sets the tone for the rest of the build, quality, and with this, we start with the 24-millimeter-deep rims that offer both low weight and great durability, and hand-lace them to the same aero (AF) hubs that you find on our top-end carbon models via 20/24 DT Swiss Competition spokes—resulting in a respectable 1495-gram wheelset. Building wheels by hand is a practice that's becoming scarce, but being fully invested in making the best wheels means that we know hand-built wheels provide a level of quality unmatched by machines. Machines miss little discrepancies that humans catch, and these are the flaws that make the difference between a good and a prestigious wheelset. If you’re looking for a no-nonsense wheelset that you can race and train on with equal aplomb, without worrying about reliability, look no further than our SLX 24 wheelset.

Replacement bearings for Stan's NoTubes Neo hubs. Includes 2 bearings. - 26mm OD x 15mm ID - 7mm thick

Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability. - No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world. Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.

Zipp's 303 Firecrest Tubeless rim brake wheels offer all-around performance for a new era of road riding. They're rich in heritage yet loaded with innovations; as adept in the mountains as on rolling hills, windswept farm lanes, or ferocious field sprints. At Zipp, we never rest on laurels. These wheels feature a 19mm internal width and are tubeless ready. That means you can run lower tire pressure for greater cornering grip and compliance while still benefiting from reduced rolling resistance and without the risk of pinch flats. When it comes to pure speed, the 303 Firecrest Tubeless packs a serious punch. They're lightweight and feature ABLC Sawtooth Technology, a complex dimpling pattern first developed for our top-level NSW wheel lineup. This technology helps to achieve the optimization of low aerodynamic drag and crosswind stability, which we call AeroBalance. The ShowStopper textured braking surface delivers unrivaled rim braking performance in wet or dry conditions. Lastly, at the center of the 303 Firecrest Tubeless rim-brake is a new versatile and durable hub, the German-engineered ZR1. - Tubeless for secure performance even when ridden at lower tire pressures - New ZR1 hub is engineered in Germany with better seal design for improved durability and quicker response with 66 points of engagement - Versatile 45mm rim profile that's fast, stable, and versatile - ABLC Sawtooth dimple design helps manage air flow around the rim, and contributes to create a faster, more stable wheel - Showstopper textured brake track delivers superior modulation and shortest stopping distances in wet and dry conditions - New Zipp graphics and cosmetic identity that scream speed - Ships with QR end caps, quick release skewers

Sta Tru Front Wheel - Single Wall rim - Hub/Brake Compatibility: Rim Brake - Wheel Size: 20-inch - ISO Diameter: 406 / 20-inch BMX - Front Axle: 3/8-inch x 100mm - Valve: Schrader - Tire Type: Clincher

Use Stan's Tubeless Valve Stems when you're converting standard rims to tubeless via the taping method. These also have a removable core for easier application of tire sealant. Note: Schrader valve is for non-stepped Hugo rims. If your Hugo rim decal reads: - MAX RIM PRESSURE: 2.8 tires: 26psi, 3.0 tires: 24psi - ERD 615, 622x49.9, 29 in x 52.3mm Your rim has a stepped valve and is not compatible with this Schrader valve.

The Problem Solvers Axle Nut is perfect for wheels with solid axles (also called bolt-on axles). This quality nut is made of durable chrome-plated steel and features a built-in integrated rotating washer to hold tight.

Wheels Manufacturing Axle Spacers help you dial in your hub spacing to ensure correct fit and side-to-side spacing in the rear triangle without having to alter the wheel's dish. - Spacers come in bags of 20

- Bladed Revolution spokes 2.0/.09x2.3/2.0mm, black surface treatment resists scratches - Cold forging technology, CrNi stainless steel with rolled threads - No hub slotting necessary - 139g (32/265mm) - Box of 20 - Nipples sold separately

The entry into the world of gravel riding, the G 1800. If you want to give cycling a try and plan to do your first rides off-road the G 1800 is your choice of wheel. Combining all the key advantages of DT's gravel segment wheels at a very attractive price point, these wheels may be your entry into the world of gravel riding. Leave for beaten roads and turn to the unexplored paths, the G 1800 will join you. - 370 based hub

This is one of the most versatile spokes in the DT Swiss spoke range. DT competition gets its special strength from cold forging. This makes an extremely durable spoke and thanks to the thinner middle section, it is 48 g lighter (per 64 spokes) than a spoke with a constant diameter of 1.8 mm. It is perfect for a wide range of uses, from road wheels to super light enduro MTB wheels. - Double Butted: 2.0/1.8/2.0 - Compatible with straight pull hubs only - One 264mm spoke = 5.9g - Nipples sold separately

- Cold forged 2.0mm 304 stainless steel with rolled threads - Nipples sold separately - 213g (32 spokes @ 262mm) - Bag of 50

Developed for short spokes with a large deflection angle. DT Pro Head nipples are designed for short spokes with a large angle of deflection, such as for e-bike use. Through the spherical contact surface, the nipple aligns automatically with the angle of the spoke, which leads to consistent power transmission. Note: brass nipples are not approved for children's products in the USA. See attached warning! All-brass nipples are recommended for e-bike use. - Weight: starting at 59g for 64 nipples.

Replacement freehub spoke protector, in various sizes for different freehub sizes. - Made of clear plastic - 3 hooks for affixing to spokes

Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Compatible with Shimano Rear 10mm x 1 axle - Rear Left Cone - Cone Wrench Size: 15mm - Threads: 10mm x 1 - Diameter: 16.9mm - Length: 15mm - 1 cone per bag - Note: O-ring / seal not included. Check the seal groove closely. This cone has a wider groove than cone CN-R024. COMPATIBLE HUBS: - Ultegra 6401 7-speed Rear - Ultegra 6402 8-speed Rear - 105 SC 1055 8-speed Rear - 105 SC 1056 7-speed Rear - XT-II M732 7-speed Rear

Ever fancied riding your road bike at its full potential? All you need to do is slot a pair 1800 SPLINEs in the dropouts. Whether you want to cut some minutes off your commute by taking new shortcuts, corner harder and hit the apex more precisely, or undertake some epic rides into unknown terrain, 1800 SPLINE allows all of that. With a precision build and high-end components throughout, it's the right wheel to find new roads and ride old ones like never before.

When mounting a wheel quickly and safely, the RWS system is untouchable. It combines the fast mounting of a conventional quick release with the force and safety of a fitting. The high-precision toothing at the inside of the lever allows you to fully tighten the axle and perfectly position the lever. - Ratcheting system tightens skewers with turns rather than a cam - Lever can be rotated into an ideal position after tightening - Conical X12 washer, compatible with Syntace X-12 system - Removable, plug-in lever design is streamlined and protects your RWS lever - Thread Pitch: 12 x 1.0mm

Surly Rim Strips have one job and they do it well. They cover the cutouts in your rim and — if you're running a tube — they protect it from spoke heads and other sharp matter (okay, so maybe they have TWO jobs but they do them both really well.) Rim strips are crucial and should be used with all Surly rims. Ours come in an array of colors so you can really "express yourself." Surly Rim strips are available in two different materials: PVC and Nylon. PVC is great if you plan on only running tubes. However, if there's any part of you that wants to try this tubeless thing you've been hearing about, Nylon strips are just the ticket. They're thinner and offer minimal stretch so they stay put and lay nicely inside the rim to provide a secure seal. Plus, they're lighter which we all know means you'll go faster… maybe.

After years of mountain biking with thru-axles with bulky handles that seemed to strike every trailside obstacle, we needed a better option. Our Lightning Bolt-On thru axles offer a high-quality, simple, lightweight alternative to that bulky handle. Available in a range of sizes that fit both front and rear wheels on all types of thru-axle-equipped bikes. - Lightning is Better—Our front and rear Lightning Bolt-On axles offer a stronger, more durable, lower profile, and lighter weight option to replace your stock thru-axles. - Low Profile—No more bulky handles to strike trail obstacles. Aerodynamic design. - Light Weight—Our axles are internally bored to remove unnecessary material without compromising strength. - Easy to install—Our matching front and rear Lightning Bolt-On Axles require only a standard 6mm hex wrench for easy installation and removal. - Better Tolerances—Manufactured in the USA to the tightest tolerances using aerospace materials and CNC manufacturing. No longer will your axle loosen while riding.

- Original equipment freehub bodies to fit SRAM hubs and wheels. - Includes Drive Side Axle End Cap

Replacement freewheel spoke protector, in various sizes for different freehub sizes. - Made of clear plastic - Fits around standard freewheel threads

The SLR 1 42 WheelSystems are efficient, lightweight, all-around, carbon road wheels that bring premium-level performance to all riders. Featuring hookless rim design and optimized carbon layup to ensure a robust yet lightweight structure, contemporary wider inner width, low friction hubs offering low rolling resistance, and Dynamic Balanced Lacing (DBL) technology to maintain maximum power efficiency, the SLR 1 42 and SLR 1 42 Disc bring outstanding performance at no compromise. - Hookless rim design enhances overall durability and offers a wider inner rim width without adding weight - Optimized carbon layup features high tensile strength carbon fiber placed at the most crucial points to provide stiff, compliant, and lightweight wheels - Low friction hub with precision machined internals eliminates excessive bearing load, reducing bearing friction, lowering rolling resistance, and minimizing power loss - Dynamic Balanced Lacing (DBL) ensures spokes are set for optimal tension when pedaling, resulting in enhanced durability and transmission efficiency - The enlarged DBL hub flange increases spoke bracing angles, boosting overall torsional, transmissional, and lateral stiffness for better power transfer - Giant's proprietary High Glass Transition Temperature (Tg) resin enhances the rim's overall durability and braking performance - 42mm-deep all-round rim profile with an updated inner width offers better support for today's higher volume road tires

- Converts Salsa Conversion hubs from 135/142 to 150mm in order to use with the RockShox Bluto Fork, or other 150 mm Thru-axle forks - Requires the wheel to be re-dished

This outer receiver unit works with the CJ-S700 Cassette Joint Unit for Shimano Alfine SG-S700 internally geared hub. This part can become worn, cracked, or torn, exposing the shift cable and possibly other components to unwanted dirt, water, mud, you name it. You don't want that.

- Braking surface: Disc - Rim weight: 445g - Finish: Black Anodize/Vinyl Decals - Type: Tubeless-ready clincher - Rim material: EA90 aluminum/welded - Rim depth: 27mm - Internal rim width: 19.5mm - External rim width: 24mm - Spoke holes: 28; 32 - ERD: 580 - Max tension: 1200 N/122 KGF